Back to document list

Setup HooToo Wireless IP Camera

  1. Open Setup Page

    Use an ethernet cable connect the camera to you router, open web browser, load the configuration page, e.g. http://192.168.1.11. Then click the setting button on the upper right corner.

  2. Configure Wireless Network

    Click "Wireless Lan" on the left column, enable "Using Wireless Lan", then enter the wireless network ID, and security setting for the wireless network, e.g., the WPA personal Key. Click Submit button to save changes.

  3. Enable Motion Detection in Arm settings

    Enable "External Alarm", and "FTP Upload". Click Save button to save changes.

  4. Configure FTP server name, user and password

    Click "FTP" on the left column, enter the FTP server name, user and password that you retrieved from NWatch.me website. You can set the "FTP Mode" to PASV.
    Click Submit button to save changes.

    Click here to learn how to get FTP account information.