Back to document list

Setup Wansview Wireless IP Camera

  1. Open Network Setup Page

    Use an ethernet cable connect the camera to you router. You may need to run the camera discovery tool on the CD to configure the IP address of the camera. Then open web browser, load the camera configuration page, e.g. http://192.168.1.11. Then click "Network" to configure the camera's network setting.

  2. Configure Wireless Network

    Click "Wireless Settings" on the right column, enable "Using Wireless Lan", then enter the wireless network ID, and security setting for the wireless network, e.g., the WPA personal Key. Click Submit button to save changes.

  3. Go to "Alarm" settings.

  4. Enable Motion Detection

    Enable "Motion Detect Armed", adjust "Motion Detect Sensibility". Enable "Upload Image to FTP". Click Submit button to save changes.

  5. Configure FTP server name, user and password

    Click "FTP Settings" on the right column, enter the FTP server name, user and password that you retrieved from NWatch.me website.
    If you want to enable inactive alert for this camera, enable option "Upload Image Periodically", and set a proper value to "Upload Interval (Seconds)".
    Click Submit button to save changes.

    Click here to learn how to get FTP account information.